铜、铝、不锈钢面板
Brass,Aluminum,and Steel-less Faceplates

铜、铝、不锈钢、PC、薄膜开关面板委托加工须知
For panel constructed of Brass,Aluminum,Stainless Steel,PC and Membrane Switch,in order to process these orders,please provide the following
◆ 提供面板的设计蓝图及标准尺寸图
　 Your artwork and drawings with standard measurements
◆ 提供开关线路图，原理图，并标明线序及出线位置
　 Your switching schematics and layouts with sizes and measurements.
◆ 衬板如需预埋螺钉，应标明尺寸，长度及数量
　 All positions,sizes,and measurements if you need holes for screws in the inner-lays
◆ 如有盘片带来，推荐用coreLDRAW8.0软件绘制，并带打印稿一份，作为参考
　 We recommend that you provide us with your drawings in a CORELDRAW8.0-11 format and printed copies for our reference.